2-in-1 Digital Hot Air and Soldering Station 3Y6P PRO

Article: 55350
500 HK$
280 HK$
Кол-во:
Description

SMT technology
High-precision temperature control +/-1°C
Temperature display
Antistatic protection
Automatic switch to standby mode

Purpose and scope

The soldering station is used for heating up or soldering work that requires careful soldering at a certain temperature. Used for rework and soldering various types of components such as SOIC, PLCC, QFP, BGA.
The station is especially convenient for soldering electronic boards and small elements, since it maintains the set temperature
and does not need to be disconnected from the power supply during operation.
The antistatic design of the product protects the board in case of static or electrical discharge.

Advantages

Closed-loop sensor system to maintain a given temperature, microcomputer for digital display data and temperature control, high starting power, fast heating, temperature stability with precision up to 1°C, which is not affected by the volume of blown air.
Unique standby mode saves energy. When the hot air gun is placed on the holder, the system is put into a standby mode of readiness. As soon as the hot air gun is removed from the holder, the system returns to the default settings.
Unique cooling system. Long pumping of air to metal elements, after turning off the device, prolongs its service life. When the temperature of air flow drops to 50°C, the power is automatically turned off. The circular impeller provides high air flow with less noise.

Safety Guide

Before starting work, make sure there are no visible mechanical damages of the product body, cables and plug.
Make sure your mains voltage matches rated voltage of the product.
Before using the product for the first time, turn it on and let it work for 3-5 minutes. If at this time you hear extraneous noise or sparking, turn off the product, unplug the power cord and determine the cause of this phenomenon. Do not turn on the product before the cause of the malfunction has been found and eliminated.
Never leave the station at high temperature for a long time.

  • Vendor:
    ЗУБР PRO
  • Rated voltage
    220 V
  • Continuous rating input
    650 W
  • Air temperature
    100 - 500 ˚C
  • Stepless temperature adjustment
    yes
  • Air flow adjustment
    yes
  • Air flow rate
    20 - 120 L/min
  • Heater Material
    CERAMIC PRO
  • Dimensions
    250x160x170 mm
share
Rated voltage
220 V
Continuous rating input
650 W
Air temperature
100 - 500 ˚C
Stepless temperature adjustment
yes
Net weight
1.8 kg
Air flow adjustment
yes
Air flow rate
20 - 120 L/min
Heater Material
CERAMIC PRO
Dimensions
250x160x170 mm
Buy in 1 click
Name:
Your Phone Number:
Comments:

Back